The TraceDec Contactless Conductivity Detector (CCD) is based on two metal electrodes, which are placed around the separation capillary, which can be of any non-conducting material (e.g. fused silica, PEEK, Teflon). After an AC voltage is applied to the actuator electrode, the current passes the capillary wall, the detection gap between the electrodes inside the capillary, and back to the pick-up electrode. The signal is then further amplified and processed. The CE-cell can be placed inside the temperature controlled capillary compartment. The detector can be used with any PrinCE and PrinCE Next system without using any tools.
|Detection Limit||10-40ppb with indirect injection|
|Cell Temperature Control||18 to 42ºC in 1ºC increments|
|Cell Temperature Accuracy||±0.5ºC|
|Line Voltage||90-132VAC, 184-264VAC, 50/60Hz|
|Dimensions and Weight Detector||250 x 105 x 250 mm (w x h x d), 3kg|
Please use the link below to request any additional details.